|
Compressed Air Filter - Sintered Bronze Elements Assembled. Compressed Air Filter
Technical Specifications
Filter Type Model
|
Pipe size In/Outlet
D
|
Element Type Code
|
Flow rateat 7 bar scfm
Nominal
|
Flow Rate at 7 bar Nm3/hr
Nominal
|
Dimensions (mm)
|
A
|
B
|
C
|
G
|
E
|
Weight
(Kg)
|
0002
|
1/2"BSP
|
210
|
15
|
25
|
80
|
21
|
232
|
73
|
75
|
1.34
|
0003
|
1/2"
|
310
|
36
|
61
|
80
|
21
|
232
|
73
|
100
|
1.34
|
0004
|
1/2"
|
410
|
50
|
85
|
80
|
21
|
266
|
73
|
125
|
1.42
|
0007
|
3/4"
|
520
|
90
|
153
|
90
|
22
|
325
|
73
|
150
|
2.0
|
0010
|
1"BSP |
525
|
150
|
254
|
120
|
36
|
338
|
73
|
150
|
3.0
|
0020
|
1"BSP |
725
|
212
|
360
|
120
|
36
|
338
|
73
|
200
|
3.0
|
0030
|
1 1/2"BSP |
1027
|
300
|
509
|
140
|
46
|
483
|
73
|
280
|
5.3
|
0037
|
2"BSP |
1030
|
424
|
720
|
167
|
46
|
500
|
73
|
280
|
8.3
|
0046
|
2"BSP |
1230
|
460
|
780
|
167
|
46
|
500
|
73
|
340
|
8.3
|
0056
|
2"BSP |
1530
|
636
|
1080
|
167
|
46
|
712
|
73
|
450
|
11.0
|
0075
|
2"BSP
|
2030
|
848
|
1440
|
167
|
46
|
712
|
73
|
560
|
12.8
|
|
|
|
|
|
|
|
|
|
|
|
0113
|
3"
|
3030
|
1130
|
1920
|
330
|
1315
|
1120
|
|
850
|
41
|
0135
|
3"
|
2440
|
1356
|
2302
|
390
|
1200
|
985
|
|
700
|
40
|
0169
|
3"
|
3050
|
1696
|
2880
|
390
|
1360
|
1130
|
|
850
|
54
|
0254
|
4"
|
3 X 2030
|
2544
|
4319
|
430
|
1100
|
870
|
|
580
|
83
|
0339
|
4"
|
3 X 3030
|
3390
|
5756
|
430
|
1370
|
1140
|
|
850
|
95
|
0452
|
6"
|
4 X 3030
|
4520
|
7675
|
510
|
1485
|
1210
|
|
875
|
140
|
0678
|
6"
|
6 X 3030
|
6780
|
11512
|
560
|
1510
|
1225
|
|
875
|
160
|
0900
|
8"
|
8 X 3030
|
9040
|
15350
|
680
|
1625
|
1285
|
|
875
|
240
|
1130
|
8"
|
10 X 3030
|
11300
|
19187
|
680
|
1680
|
1285
|
|
875
|
245
|
1356
|
10"
|
12 X 3030
|
13560
|
23024
|
820
|
1730
|
1350
|
|
875
|
382
|
1800
|
10"
|
16 X 3030
|
18080
|
30700
|
820
|
1730
|
1350
|
|
875
|
400
|
2260
|
12"
|
20 X 3030
|
22600
|
38375
|
950
|
1890
|
1445
|
|
900
|
540
|
For flowrates at other pressures, apply the correction factor as shown
Working Pressure
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
Conversion Factor
|
0.25
|
0.36
|
0.5
|
0.6
|
0.75
|
0.9
|
1.0
|
1.06
|
1.13
|
1.19
|
1.25
|
1.3
|
1.36
|
1.4
|
1.46
|
1.5
|
Ordering Example
To order a 0.01 micron filter following 30cfm at 7 bar specify type UF0003 Replacement element is UF310
-
Filter Model 0002 - 0075 Die cast Aluminium Filter Housing have female
thread end connections outer surface powder coated and have manual
drain.
-
Filter Model 0113 - 2260 fabricated Carbon Steel / Stainless Steel
filter housings with ASA 150# SORF flange connections and have manual
drain.
-
Housings are built and tested for a temperature upto 120°C at Pn 16.
-
Clogging indicator, sight glass, automatic drain-optional accessories at extra cost.
-
The filter type (Grade) AC will not remove Co, Co2 or other taxic gases or fumes.
-
High pressure filters upto 400 bar operating pressure available on request.
-
Flow rates in the table listed m3 compressed air at 1 bar, abs and 21°C.
Technical Data
|
Filter Type (Grade)
|
SB
|
PF
|
UF
|
AC
|
NX
|
|
Maximum Operating Pressure - bar.g. (0002 - 1800)
|
16
|
16
|
16
|
16
|
16
|
|
Maximum Recommended Operating Temp. °C
|
65
|
65
|
65
|
35
|
180
|
|
Minimum Recommended Operating Temp. °C
|
1.5
|
1.5
|
1.5
|
1.5
|
1.5
|
|
Initial Clean Differential Pressure at nominal flow: P bar
|
0.08
|
0.1
|
0.12
|
0.08
|
0.14
|
|
Initial "Wet" Differential Pressure: P bar
|
0.1
|
0.14
|
0.2
|
0.2
|
0.3
|
|
Maximum recommended Differential Pressure for Element Change: P bar
|
0.7-1
|
0.7-1
|
0.7-1
|
1000
hrs
|
0.7-1
|
|
Efficiency: 21°C, 1 bar, abs at an inlet concentration of
3mg/m3
SB: 100% related to pore size
PF: 0.5 mg/m3
PF + UF 0.01 mg/m3 (0.01PPM) 99.9999%
PF + UF + AC -< 0.003 mg/m3 (< 0.003 PPM)
|
|
|
|
|
|
Operation Charcteristics
MS Moisture separator. For the
removal of 99% bulk oil / water from the compressed air system.
Filter Type SB: Pre-Filtration
Sintered bronze filter element for the
removal of pipe scales, bulk liquid, solid particles, dust down to
down 5 micron. Ideal as pre filter before line filter (Filter element
regenerable) available in 25, 10, 5 microns.
Filter Type PF: High Efficiency Fine
Filter
For the removal of particles down to 1
micron including coalesced liquid water and oil, dust, providing a
maximum remaining oil aerosol content of 0.5mg/m3 at 21°C
Filter Type UF: High Efficiency Oil
Removal Filtration
For the removal of particles down to
0.01 micron including water and oil aerosols, dust, proving a maximum
remaining oil aerosol content of 0.01mg/m3 (0.01 ppm) at 21°C
efficiency - 99.9999% (install in series with filter type PF). (Borosilicate glass micro fibres - media which actively repel oil
and water to reduce pressure drop and running cost to an absolute
minimum)
Filter Type AC: Activated Carbon
Filtration.
For the removal of vapour and
hydrocarbon odours giving a maximum remaining oil content of
<0.003mg/m3 (<0.003 ppm) (w) (excluding methane) at 21°C
(install in series with filter type PF+UF).
Note: It is essential to change the filter
elements every year or earlier if the clogging indicator (D.P Gauge)
changes to red.
Filter elements available
- Designed to customer specifications.
- To suit other manufactures housings.
|
